Data Sheet

The parts in your kit
Component Qty. Description Appearance
8
Resistor,
22 kilohms
(22 kΩ)
Item No. 708808
Resistor,
120 kilohms
(120 kΩ)
Item No. 708809
Electrolytic
capacitor,
100 microfarads
(100 μF)
Item No. 708810
Capacitor,
0.1 microfarad
(0.1 μF)
Item No. 708812
Red connecting
wire with plugs
Item No. 706428
Blue connecting
wire with plugs
Item No. 706429
Divider
Item No. 706078
Additionally
required
household items
These are listed in
italic (slanted) let-
ters in the “You will
need” sections.
This is just like the 1-kilohm resistor,
except this one offers 22 times the
resistance to the current.
The same applies as with the 1-kilohm
resistor, except this one offers 120
times the resistance to the current.
Capacitors have important tasks to
perform in circuits. They possess various
electrical values, indicated in “micro-
farads” (μF). Install capacitors only
as shown in the circuit diagrams. Pay
attention to the correct value and the +
sign, or they might get damaged.
Here, everything is just like with the
100-microfarad capacitor, except this
one has a much lower microfarad value.
It makes no difference how you insert
this one.
For connecting electronic parts. At the
ends, there are contacts that fit into the
green wire connectors. Referred to in
brief as “red wire.”
Like the red connecting wire with plugs,
but in a different color. In the instruc-
tions, it is referred to in brief as “blue
wire.”
You can use this tool to pry the inserted
components or connectors apart with-
out bending the plugs. Slide it between
the components and push the compo-
nents apart.
· metal paper clips
•tape
•all-purposeglue
•aluminumfoil
•scissors
•cardboard
•w h i t e paper
1
1
1
1
1
1
1
•papertoweltube
•deionizedwater
•tapwater
•thinwire
•flashlight
•TVremote
•digitalcamera
· plastic ruler
• verysoftpencil
• cloth
• pieceofplasticwrap
• tablesalt
• drinkingglass
• teaspoon
Electronics Learning Circuits Manual.indd 8 3/29/11 2:26 PM