Data Sheet

Kit Contents
Component Name Qty. Component Description Component Illustration
Electrolytic
capacitor, 
microfarads (
F)
Item No. 
 Capacitors have important
tasks to perform in circuits.
They come in a variety of
electrical magnitudes,
indicated in “microfarads”
(F). Only install the -F
capacitor as shown in the
circuit diagrams.
CAUTION! Always pay
attention to the correct
value and the polarity (the
direction of the + sign), or
they might get damaged.
Electrolytic
capacitor, 
microfarads (
F)
Item No. 
 Only install the -F
capacitor as shown in the
circuit diagrams.
CAUTION! Always pay
attention to the correct
value and the + sign, or they
might get damaged.
Electrolytic
capacitor, 
microfarads (
F)
Item No. 
 Again, only install the -F
capacitor as shown in the
circuit diagrams.
CAUTION! Always pay
attention to the correct
value and the + sign, or they
might get damaged.
Capacitor, .
microfarad (. F)
Item No. 
 With this capacitor, it
makes no difference
which way around you
install it.
Component Name Qty. Component Description Component Illustration
Resistor,
 kilohms
( k)
Item No. 
 Resistors allow you to
regulate the flow of current.
They come in various
electrical magnitudes,
indicated in “ohms” (),
“kilohms” (k), or
“megohms” (M). Resistors
with large values let less
current through than ones
with smaller values printed
on them.
CAUTION! Always use the
resistor with the correct
specified value!
Resistor,
 megohm ( M)
Item No. 

Thermistor (NTC)
Item No. 
 A resistor that changes its
resistance depending on the
temperature — with the
resistance dropping as the
temperature rises. At room
temperature, it’s about 
kilohms.
Potentiometer,
 k
Item No. 
 A continuously adjustable
resistor with a maximum
resistance of about 
kilohms. Informally known
as a “pot.”
Potentiometer,
 k
Item No. 
 A continuously adjustable
resistor with a maximum
resistance of about 
kilohms.
Component Name Qty. Component Description Component Illustration
Capacitor, .
microfarad (.
F)
Item No. 
 With this capacitor as well,
it makes no difference which
way around you install it.
Red connecting
wire with plugs
Item No. 
 For connecting electronic
components. At the ends,
there are contacts that fit
into the green X-connectors.
Referred to as “red wire” for
short, and primarily used to
make a connection to a
positive terminal.
Blue connecting
wire with plugs
Item No. 
 Like the red connecting wire
with plugs, but in a different
color. In the instructions, it is
referred to as “blue wire” for
short. Primarily used to
make a connection to a
negative terminal.
Yellow connecting
wire with plugs
Item No. 
 Like the red and blue
connecting wire with plugs,
but yellow. In the
instructions, it is referred to
as “yellow wire” for short.
Use it for connections inside
the circuit that don’t
specifically have anything
to do with a positive or
negative terminal.
