Table of contents Safety instructions ��������������������������������������� 24 Product details ��������������������������������������������� 25 Product description Intended use Technical data 25 25 26 Installation and assembly ���������������������������� 27 Assembly on DIN-rail Connecting and mounting the brightness sensor Wiring diagram Set-up 27 27 28 29 Menu structure Initial start-up – Language menu Date and time setting Daylight Saving Time New program View and edit programs Delete program Switc
Safety instructions Product details Danger! Risk of electric shock! DANGER ZZConnection and mounting must be realized by a professional electrician! • Please observe the national regulations and safety instructions • Interferences and changes to the device will invalidate the warranty and guaranty rights • Minimum diameter of the flexible lines for the terminals: 1 mm2 Maximum diameter: 4 mm2 Product description Intended use Photoelectric switch • 1 channel or 2 channel • Adjustable ON/OFF switching
Installation and assembly Technical data AC switching capacity: – Ohmic load (VDE, IEC) – Inductive load cos φ 0,6 – Incandescent/halogen lamp load – Fluorescent lamp – Rated load AC1 / AC15 Ambient temperature: – Control unit / Brightness sensor Protection type: – Control unit / Brightness sensor Photoelectric switches: – Adjustment range – Switching delay Time switch: – Memory spaces – Accuracy – Running reserve 26 16 A / 250 V AC 10 A / 250 V AC 2600W 1000W 3700W / 750W -10°C + 55°C / -30°C Danger! R
Wiring diagram ! Set-up If you connect the sensor to the + and - terminals, you must connect a jumper between terminals B1 and B2 If you operate several devices on one sensor, this jumper may only be used for one device 1 channel 2 channel CH1 CH1 M ~ 5 CH2 The device - twilight switch and timer - only activates the output (terminals 1 and 5) when all three conditions are fulfilled: • brightness is lower than the adjusted value • the adjusted delay time has passed • the timer is set to = ON If you
Operation and adjustment Display and function keys • The central line of the display, in which the adjusted values and selected menu items are displayed, is displayed larger • Flashing means that an entry is required If you do not enter anything within two minutes, the timer switches back to automatic operation • The programs are maintained when resetting You need to readjust date and time Press the reset button using a blunt object (ball-point pen) Turn the rotary switch to adjust the desired lux value (2
Functions of the left-hand buttons: + – scroll up in menu scroll down in menu Select/reject suggestion Select/accept suggestion Press briefly = +1 / Press and hold (approx 2 sec) = +5 Press briefly = –1 / Press and hold (approx 2 sec) = –5 Functions of the right-hand buttons: MENU Exits the Automatic mode and enters ESC OK EDT NO YES DEL the Programming mode Press briefly = one step back Press and hold (approx 2 sec) = return to Automatic mode Make selection and apply Change request in “Review mode“ Do
Initial start-up – Language menu When delivered, the timer is in automatic mode with preset time, date (CET) and menu in English Press the Menu button to make settings Then select the desired setting MENU LANGUAGE ENGLISH Date and time setting MENU Daylight Saving Time The following settings are possible: MENU AUTO OK DATETIME OK YEAR OK MONTH OK DAY OK HOURS OK MINUTES SU WI 2103:3110 CALIBRAT OK OK In the menu 12H 24H you can choose between AM/PM and 12/24-hour announcement 34 Factory presetting
New program 1 2 3 MENU OK PROGRAM OK NEW OK SELECT CHL OK DAY CHL ON OK H CHL ON OK MIN CHL ON OK DAY CHL OFF * H CHL OFF MIN CHL OFF 4 OK OK *) Available only if individual days have been selected for the ON command Press the Menu button Confirm PROGRAM by pressing OK Confirm NEW by pressing OK ZZFree memory space is briefly displayed For 2-channel version only: Select a channel and confirm by pressing OK ZZThe weekday display is flashing OFF command: 8 If requested, select the desired days and co
View and edit programs Delete program MENU PROGRAM REVIEW ON P01 OFF OK OK EDT/OK P02 EDT/OK • Press to scroll through the different program steps • Press OK to get to the next program • Press EDT to edit a program This procedure is similar to creating a new program Delete all programs Delete individual programs • Press YES to delete all programs • Press NO to delete individual programs • For deleting individual programs, all belonging program steps are deleted (e g P01 ON and P02 OFF) • Press OK
Grässlin GmbH Bundesstraße 36 D-78112 St Georgen Germany Phone: +49 (0) 7724 / 933-0 Fax: +49 (0) 7724 / 933-240 80 10 1237 7/09/09/01 www graesslin de info@graesslin de
