Manual

28
12. Cycle switching commands
Start time End time
Pause Pause
Cycle duration
60 min.
Cycle duration
60 min.
ON switching duration
10 minutes
Select free memory location:
Press the Prog. key 1x.
––.––
–– ––
Enter as required:
– Switching command, weekday(s),
switching state, see Section 8
– Single date without/with year,
see Section 9.1
– Date range without/with year,
see Section 9.2
Press the key 1x.
01 minutes are offered.
Preselection for
seconds or minutes
m/s key