Manual

8. Switching commands

The input of the switching commands applies to all types of assignment

• Switching commands without date assignment, always in block 00,

always with priority 0 (standard switching commands).

• Switching commands with single date, see Section 9.1

• Switching commands with date range, see Section 9.2

• Pulse switching commands, see Section 11

• Cycle switching commands, see Section 12

You determine the switching times and the switching state for the

relevat channel.

Symbol ON; OFF

• Switching commands for each channel the same, all ON or all OFF

• Switching commands for each channel different, ON and OFF

Note: In the case of multi-channel clocks, channel 1 is always offered.

The switching state can also be deactivated for each channel.

No symbol = no switching.

Select free memory location:

Press the Prog. Key 1x.

––.––

–– ––

Setting the switching times:

Hours with the h key

Minutes with the m key