6 12 18 24 C1 15:26:38 MENU 1 2 Res.
Table of Contents Safety Instructions ��������������������������������������� 47 Information about the device ����������������������� 48 Description of the device �������������������������������������������������48 Designated use ����������������������������������������������������������������48 Technical data �����������������������������������������������������������������49 Installation and mounting ���������������������������� 50 Mounting on DIN rail ����������������������������������������������������
Set date and time ������������������������������������������������������������56 AM/PM – 12/24 hour display �������������������������������������������57 Switchover summertime/wintertime ��������������������������������58 Create weekly program ����������������������������������������������������59 Create yearly program �����������������������������������������������������67 View and edit program �����������������������������������������������������72 Delete program ������������������������������������������
Safety Instructions Danger! Risk of electric shock! ZZConnection WARNING • • • • • and mounting must be realized by a professional electrician! To avoid injuries, the device must be connected and mounted by a skilled electrician only! Before changing the battery, the device must be disconnected from the power supply! Please observe the national regulations and safety instructions. Interferences and changes to the device will invalidate the warranty and guaranty rights.
Information about the device Description of the device Designated use Universal digital timer • 800 memory locations • Date-based programming • Pulse, cycle program • P C-assisted program generation • Extension to 8 channels through channel extension • Powerline Communication (PLC) • LAN, Internet communication • The timer is used for –– lighting in private homes and commerce –– advertising –– street lighting –– shop window lighting –– controlling devices, motors and pumps –– controlling shutters and bl
Technical data Dimensions Hx W x D (mm) Weight g (approx.) Main voltage Protection class Power consumption Switching capacity ––Ohmic load (VDE, IEC) ––Inductive load cos φ 0.6 ––Glow/halogen lamp load ––Fluorescent light ––Max. switching capacity AC1 / AC15 Switching contacts Ambient temperature Accuracy Shortest switching interval Switching state display Sealable EN 45 x 52.5 x 60 220 See rating plate || 5 VA 16 A / 250 V AC 10 A / 250 V AC 2600W 1000W 3700W / 750W Change-over contact -10°C...
Installation and mounting Danger! Risk of electric shock! WARNING ZZConnection and mounting must be realized by a professional electrician! Mounting on DIN rail Connection diagram CH1 = channel 1 CH2 = channel 2 5 6 7 + _ L DCF/GPS Ch2 M ~ Ch1 Put the device slightly inclined on top of the rail. Then push it backwards until it engages. 1 2 3 S N External input 50 LAN module and timer must be operated in the same phase.
Operation and configuration Switch-off commands have a higher priority than switch-on commands. Display and function keys • The central line of the display, in which the adjusted values and selected menu items are displayed, is displayed larger. • Flashing means that an entry is required. If you do not enter anything within two minutes, the timer switches back to automatic operation. • "MAINSOFF" appears on the display when the device is not supplied with power.
M D Display 1 6 12 18 24 C1 C 15:26:38 E F G A B C D B MENU A 1 2 Res. H I L J K E F G H Keys/Interfaces I J K L M 52 Function displays of the two left keys Switching state displays (ON/OFF/OVR/FIX) 3 display lines Weekdays The assignment can be changed in the DATETIME menu, for example to 1 = Sunday.
Function displays of the two left keys: + - Scroll upwards in the menu Scroll downwards in the menu Accept selection/proposal Brief key press = +1 / long key press (about 2 sec) = fast forward Brief key press = -1 / long key press (about 2 sec) = fast forward Function displays of the two right keys: MENU Leaves Automatic mode and enters Programming mode ESC Brief key press = one step backward OK EDT NO YES DEL Long key press (about 2 sec) = Back to Automatic mode Make a selection and accept Change progr
Menu structure MENU PROGRAM DAYLIGHT NEW AUTO CHL EXT NO TAXIMODE CALIBR 1 LAN CALIBR 2 LIGHT WEEKLY ON/OFF PULSE CYCLE PIN ANNUAL REPEAT NO REPEAT DELETE REVIEW 54 CONFIG ON/OFF PULSE CYCLE H COUNTER EXT I/P
RANDOM 12H 24H LANGUAGE AM PM DEUTSCH 24H FRANCAIS DATETIME ESPANOL PORTUGES ITALIANO NEDERLAND CESKY ...
Commissioning – Select menu language Set date and time When delivered, the timer is in automatic mode with preset time, date (CET) and menu in English. Press the Menu button to make settings. Then select the desired setting. MENU LANGUAGE ENGLISH MENU OK DATETIME OK YEAR OK MONTH OK DAY OK DAY * OK HOUR OK MINUTE OK OK *) Set the weekday in accordance with the current date.
AM/PM – 12/24 hour display MENU 12H 24H AM PM 24H EN OK OK 57
Switchover summertime/wintertime The following settings are possible: MENU AUTO In-factory default setting as specified by law (USA or EU). It will be recalculated every year. OK DAYLIGHT OK CALIBR 1 SU START MONTH OK OK SU START DAY WI START MONTH OK OK WI START DAY SU WI 2103:3110 CAL 58 NO No changeover. CALIBR 1 (AUTO) OK Manual Programming. The programmed summer/winter time will be recalculated automatically for each year.
Create weekly program –– The time change-over occurs on the respective Sunday from 2 to 3 o‘clock (summertime) or from 3 to 2 o‘clock (wintertime). CALIBR 2 (FIX) Manual Programming. The change-over takes place every year always on the same date.
A ON/OFF programming OK ON/OFF OK CHL EXT OK SELECT CHL OK DAY CHL ON OK H CHL ON OK MIN CHL ON 1. Confirm ON/OFF by pressing OK. ZZFree memory locations are briefly displayed. 2. Select number of channel extensions and confirm by pressing OK. 3. When prompted, select channels and confirm by pressing . OK ZZThe weekday display is flashing. ON command: 4. Select the desired days and confirm by pressing OK 5. Enter hour (+/-) OK 6.
OK DAY CHL OFF * OK H CHL OFF OK MIN CHL OFF OFF command: 7. When prompted, select desired days confirm by pressing OK 8. Enter hour (+/-) OK 9. Enter minutes (+/-) OK ZZThe program is saved. and SAVED *) Available only if individual days have been selected for the ON command.
B Pulse programming Start time Duration 15.00 h A pulse switching command consists of: • Start time • Duration = ON switching duration shortest ON switching duration = 1 sec. longest ON switching duration = 59 min., 59 sec. Example: ON command for channel 1 daily from Monday to Friday at 3.00 pm. ON switching duration 15 minutes.
1. Confirm PULSE by pressing OK. ZZFree memory locations are briefly displayed. 2. Select number of channel extensions and confirm by pressing OK. 3. When prompted, select channels and confirm by pressing . OK ZZThe weekday display is flashing. Duration: 7. Enter minutes or seconds (+/-) and confirm by pressing OK. ZZThe program is saved. ON command: 4. Select the desired days and confirm by pressing OK 5. Enter hour (+/-) OK 6.
C Cycle programming Period Start time Duration Pause 9.00 h Channel ON Duration of the cycle Stop time 19.00 h Channel OFF The cycle duration must not be less than the period. No nesting of cycle programs is allowed.
OK CYCLE OK CHL EXT OK SELECT CHL OK DAY CHL ON OK H CHL ON OK MIN CHL ON OK DAY PERIOD OK H PERIOD OK MIN PERIOD OK SEC PERIOD 1. Confirm CYCLE by pressing OK. ZZFree memory locations are briefly displayed. 2. Select number of channel extensions and confirm by pressing OK. 3. When prompted, select channels and confirm by pressing . OK ZZThe weekday display is flashing. ON command: 4. Select the desired days and confirm by pressing OK 5. Enter hour (+/-) OK 6.
OK DAY DURATION OK H DURATION OK MIN DURATION OK SEC DURATION OK DAY CHL OFF * H CHL OFF MIN CHL OFF Duration: 8. Enter days, hours, minutes or seconds (+/-) and confirm by pressing OK. OK OK SAVED *) Available only if individual days have been selected for the ON command. 66 OFF command: 9. When prompted, select desired days confirm by pressing OK 10. Enter hour (+/-) OK 11. Enter minutes (+/-) OK ZZThe program is saved.
Create yearly program A NO REPEAT Switching once. Start and stop date (year, month, day,) are set by you. MENU PROGRAM NEW ANNUAL OK OK OK REPEAT NO REPEAT B A OK B REPEAT Recurring program. This is done each year at the same time until you remove the program in the menu under Program Delete.
A NO REPEAT - ON/OFF programming OK ON/OFF OK CHL EXT OK SELECT CHL OK DAY CHL ON OK YEAR START OK MONTH START OK DAY START OK YEAR END OK MONTH END DAY END OK For CYCLE and PULSE, you also have to set the duration and/or period. The procedure is the same as for creating a weekly program. OK H CHL ON OK MIN CHL ON OK DAY CHL OFF * OK H CHL OFF OK MIN CHL OFF SAVED *) Available only if individual days have been selected for the ON command.
1. Confirm ON/OFF by pressing OK. ZZFree memory locations are briefly displayed. 2. Select number of channel extensions and confirm by pressing OK. 3. When prompted, select channels and confirm by pressing . OK ZZThe weekday display is flashing. OFF command: 9. When prompted, select desired days confirm by pressing OK 10. Enter hour (+/-) OK 11. Enter minutes (+/-) OK ZZThe program is saved. and ON command: 4. Select the desired days and confirm by pressing OK 5.
B REPEAT - ON/OFF programming OK ON/OFF OK CHL EXT OK SELECT CHL OK DAY CHL ON OK MONATH START OK DAY START OK MONTH END OK DAY END For CYCLE and PULSE, you also have to set the duration and/or period. The procedure is the same as for creating a weekly program. OK H CHL ON OK MIN CHL ON OK DAY CHL OFF * OK H CHL OFF OK MIN CHL OFF SAVED *) Available only if individual days have been selected for the ON command.
1. Confirm ON/OFF by pressing OK. ZZFree memory locations are briefly displayed. 2. Select number of channel extensions and confirm by pressing OK. 3. When prompted, select channels and confirm by pressing . OK ZZThe weekday display is flashing. OFF command: 9. When prompted, select desired days confirm by pressing OK 10. Enter hour (+/-) OK 11. Enter minutes (+/-) OK ZZThe program is saved. and ON command: 4. Select the desired days and confirm by pressing OK 5.
View and edit program MENU OK PROGRAM OK REVIEW OK WEEKLY OK ONOFF ONO P001 EDT/OK CHANNELS 1 72 Weekly and yearly programs can be viewed and edited separately. • Press to scroll through the different program steps. • Press EDT to edit a program. This procedure is similar to creating a new program. • Press OK to go to the next program.
Delete program Delete individual programs Delete all programs • Press YES to delete all programs. • Press NO to delete individual programs. MENU OK PROGRAM OK DELETE YES DELETE ALL • Press OK to go to the next program.
Random switching program The programmed switching command is delayed by a variable (random) period of 0-30 minutes. ON 7:00 20:00 OFF 7:30 20:30 MENU RANDOM RANDOM Finish random switching program RANDOM RANDOM DEL OK OK XX Press DEL 1. Press OK to start the random switching program. ZZRANDOM flashes. 2. To return to the main menu, press the Menu key. 74 OK to finish the random switching program. ZZThe timer returns to Automatic mode.
Configuration Channel extension – Add MENU CONFIG EXT I/P CHL EXT TAXIMODE ... OK OK Communication between the channel extension and the timer takes place via Powerline Communication (PLC). Channel extension and timer must be operated in the same phase. The distance between the two devices must not be more than 50 meters. You can extend the timer to up to eight channels. Add each extension separately.
Channel extension – Delete OK CHL EXT OK ADD EXT OK ADD CHL EXT PUSH CHL EXT BUTTON SYNCHRON CHL EXT • Each channel extension must be deleted separately. • Press OK to go to the next channel extension. • Press DEL to delete the channel extension. OK synchronization, press any key on the channel extension. OK CHL EXT OK DEL EXT OK DELETE EXT XX For ZZAfter 76 successful synchronization, a confirmation appears on the display.
Taxxi Mode • A taxxi module can be used to exchange programs via the IR interface. To do so, the device must be in the TAXIMODE and connected to power. • Press ESC to finish the TAXIMODE. TAXXI Operation of taxxi module: 1. Press PROG to select the program number. 2. Press IN to read in a program. Press OUT to read out a program. 3. Hold the taxxi module vertically over the IR interface. 4. Pressing IN or OUT again will start the transmission. A wrong transmission is shown by Er2.
External input - Manual switch External input – Pulse counter Select EXT O/R to assign a channel to an external button. Upon pressing the button, an override switching command will be executed. It will be in effect until the next time the button is pressed or until the next automatic switching command. (For a description of the Override mode, see page 83) Press I/P COUNT to check the pulse counter. It will count how many times the external button was pressed.
External input - Countdown timer Select COUNTDOWN to set the time for a countdown timer. Upon pressing the button, an ON switching command will be carried out. It switches the selected channel ON for the set time. Pressing the button again will start the countdown timer again at the set time. If a program is already running on the selected channel, no switching command will be executed! After the time has expired, the timer returns to Automatic mode.
Set PIN Hour counter • Press + - to set a numeric value. • Press OK to set the next number. • Press PIN PIN PIN 0000 OK OK OK Select NO PIN, to remove the PIN. 80 to select the channels. H COUNTER SELECT SELECT CHANNEL OK OK OK Select REVIEW to check the hour counter. • Press to scroll through the different program steps. • Press RES to reset the hour counter for this channel.
Set service counter You can set the number of operating hours after which a service message is to appear. It will be shown on the display as soon as the counter has reached the number of hours set by you. OK H COUNTER OK SERVICE EDT/OK SELCT CHL OK CHANNEL 1 00000H Background illumination LIGHT FIX ON 2 MIN OK OK • Select FIX ON to set the background lighting permanently. • Select 2 MIN if you want the background lighting to be automatically switched off 2 minutes after your last input.
Add LAN module Each LAN module must be added via the Timer menu! Communication between the LAN module and the timer takes place via Powerline Communication (PLC). LAN module and timer must be operated in the same phase. The distance between the two devices must not be more than 50 meters. XX For LAN ADD LAN PUSH LAN KEY OK OK OK SYNCHRON LAN synchronization, you must press the COM key on the LAN module. ZZAfter successful synchronization, the timer display shows a confirmation.
Automatic/Manual mode • Manual switch: Duration ON / Duration OFF / OVR / Automatic mode • Left button = channel 1 / right button = channel 2 Switching state display = channel ON = channel OFF There is no display in automatic mode. 1 6 12 18 24 C1 Override mode 15:26:38 MENU 1 2 Res.
Maintenance and repair Battery change 1 6 12 18 24 C1 15:26:38 MENU 1 2 84 Res. When a battery is changed without power supply, date and time will get lost! 1. Lift the battery compartment using a screwdriver. 2. Take the battery out of the support. 3. Insert new battery into support. Observe polarity of the battery! 4. Push battery support downward until it engages. 5. Dispose of the battery in an environmentally friendly manner.
Disposal / Recycling Dispose of the packing material correctly according to legal requirements and regulations. Observe the following notes for disposing of defective system components or the system after its service life: • Dispose of appropriately, i.e. separating the parts to be disposed of according to material groups. • Do not throw electrical and electronic components in the bin. Bring these parts to the recycling centers.
Grässlin GmbH Bundesstraße 36 D-78112 St. Georgen Germany Phone: +49 (0) 7724 / 933-0 Fax: +49 (0) 7724 / 933-240 80.10.1232.7/10/10/01 www.graesslin.de info@graesslin.
