Operation Manual

49
To wall mount:
1. Fix a screw (not supplied) into the desired wall, leaving the head extended out by
about 5mm.
2. Place the weather station onto the screw, using the hanging hole on the backside.
Gently pull the weather station down to lock the screw into place.
POSITIONING THE OUTDOOR TEMPERATURE TRANSMITTER
The sensor is supplied with a holder that may be attached to a wall with the two
screws supplied. The sensor can also be position on a flat surface by securing the
stand to the bottom to the transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and plastic anchors.
2. Clip the sensor onto the bracket.
Note:
Before permanently fixing the remote temperature transmitter wall base, pace all units
in the desired locations to check that the outdoor temperature readings are receivable.