Operation Manual

46
TOGGLING AND RESETTING THE INDOOR RECORDINGS
1. To toggle between the indoor current, minimum and maximum temperature and humidity data and the
times at which they were recorded, press the IN key:
Once to show the MIN temperature and humidity values with time and date recorded
Twice to show the MAX temperature and humidity values with time and date recorded
Three times to return to the current time, date, temperature and humidity levels.
Note: the time/date information is only available for the MIN/MAX temperature data.
2. To reset the MIN/MAX temperature and humidity data and the times at which they were recorded,
press the IN key continuously for about 3 seconds. This will reset all minimum and maximum data
recorded to the current time, date, temperature and humidity.
OUTDOOR TEMPERATURE
The fifth LCD section shows the outdoor temperature and a reception signal. A number beside the
temperature will also show the channel number if more than one transmitter is used.
TOGGLING AND RESETTING THE OUTDOOR RECORDINGS:
1. To toggle between the outdoor current, minimum and maximum temperature data and the times at
which they were recorded, press the OUT key:
Once to show the MIN temperature value with time and date recorded
Twice to show the MAX temperature value with time and date recorded
Three times to return to the current time, date and temperature level
Number showing the
transmitter unit (only if there is
more than one transmitter)
Outdoor reception signal
Outdoor temperature
in °C or °F
Maximum Display