Datasheet

36
HOW TO INSTALL AND REPLACE BATTERIES
IN THE TEMPERATURE TRANSMITTER
The Temperature Transmitter uses 2 x AAA, IECLR3,
1.5V batteries. To install and replace the batteries, please
follow the steps below:
1. Slide the battery cover downwards and remove.
2. Insert the batteries, observing the correct polarity
(see marking).
3. Replace the battery cover.
Note:
In the event of changing batteries in any of the units, all
units need to be reset by following the setting up
procedures. This is because a random security code is
assigned by the transmitter at start-up and this code must
be received and stored by the Weather Station in the first
three minutes of power being supplied to it.
BATTERY CHANGE:
It is recommended to replace the batteries in all units on
an annual basis to ensure optimum accuracy of these
units.
Please participate in the preservation of
the environment. Return used batteries
to an authorized depot.
This socket is only for the
external probe. Do not
apply power plug to it.
Optional
external probe