Datasheet

Note : User shall insert the batteries into the

second transmitter within 45 seconds after the

Temperature Station displays the information of the

first transmitter. Or immediately after reception of

the first transmitter is finished

6. The outdoor temperature from the second

transmitter and the "channel 3" icon should then be

displayed on the Temperature Station. If this does

not happen after 2 minutes, the batteries will need

to be removed from all the units and reset from

step 1.

7. In order to ensure sufficient 868 MHz transmission

however, the distance between the Temperature

Station and the transmitter should not be more than

100 meters (see notes on “Positioning” and “868

MHz Reception”).

HOW TO INSTALL AND REPLACE BATTERIES

IN THE TEMPERATURE STATION

The Temperature Station uses 2 x AA, IEC LR6, 1.5V

batteries. When batteries will need to be replaced, the low

battery symbol will appear on the LCD.

To install and replace the batteries, please follow the

steps below:

1. Insert finger or other

solid object in the

space at the bottom

center of the battery

compartment and lift

up to remove the

cover.

2. Insert batteries

observing the correct

polarity (see battery

compartment marking).

3. Replace battery cover.