Datasheet

32
• Low battery indicator
• Wireless transmission at 868 MHz
• Signal reception intervals at 4 seconds
• Wall mounting or table standing
THE OUTDOOR TRANSMITTER
• Remote transmission of
outdoor temperature to
weather station by 868 MHz
signal
• Wall mounting case
• Mounting at a sheltered place.
Avoid direct rain and sunshine
SETTING UP:
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter
(see “How to install and replace batteries
in the Temperature Transmitter” below).
2. Within 2 minutes of powering up the
transmitter, insert the batteries in the
Temperature Station (see “How to install
and replace batteries in the Weather
Station” below). Once the batteries are in
place, all segments of the LCD will light up
briefly. Following the indoor
temperature/humidity and the time as 0:00
will be displayed. If these information are
not displayed on the LCD after 60 seconds,
remove the batteries and wait for at least 60
seconds before reinserting them. Once the
indoor data is displayed user may proceed
to the next step.
3. After the batteries are inserted, the