Datasheet

52
position where a large metal or highly polished surface is
in the immediate proximity (garage doors, double glazing,
etc.). Before securing in place, please ensure that the
Temperature station can receive the 868MHz signal from
the transmitter at the positions that you wish to situate
them.
The transmitter simply clicks in or out of the holder. When
inserting or removing the transmitter from the wall holder
please hold both units securely.
CARE AND MAINTENANCE:
• Extreme temperatures, vibration and shock should
be avoided as these may cause damage to the
units and give inaccurate forecasts and readings.
• When cleaning the displays and casings, use a soft
damp cloth only. Do not use solvents or scouring
agents as they may mark the LCD and casing.
• Do not submerge the units in water.
• Immediately remove all low powered batteries to
avoid leakage and damage. Replace only with new
batteries of the recommended type.
• Do not make any repair attempts to the units.
Return it to its original point of purchase for repair
by a qualified engineer. Opening and tampering
with the units may invalidate its guarantee.
• Do not expose the units to extreme and sudden
temperature changes, this may lead to rapid
changes in forecasts and readings and thereby
reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range
Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution
14.2°F to 139.8°F with 0.2°F resolution
(“OF.L” displayed if outside this range)
Outdoor : -39.9ºC to +59.9ºC with 0.1°C resolution