SDS

Product Name CARBON-ZINC BATTERY Revision date 19-Apr-2015
_
____________________________________________________________________________________________
_
____________________________________________________________________________________________
Page 2
/
9
Ammonium chloride 12125-02-9 17.902
Zinc chloride 7646-85-7 7.68
Graphite 7782-42-5 6.18
Cellulose 9004-34-6 3.51
Copper 7440-50-8 1.12
Polystyrene 9003-53-6 1.01
Lead 7439-92-1 0.018
4. FIRST AID MEASURES
Description of first aid measures
General advice Remove contaminated clothing and shoes. If symptoms persist, call a physician.
Inhalation If fumes from reactions are inhaled, move to fresh air immediately. IF INHALED:
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
If breathing is difficult, give oxygen.
Skin Contact In case of contact with substance, keep exposed skin areas immersed in water or
covered with wet bandages until medical attention is received.
Eye contact Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and
upper eyelids. Consult a physician.
Ingestion Rinse mouth. Get medical attention. Never give anything by mouth to an
unconscious person.
Most important symptoms and effects, both acute and delayed
No information available.
Indication of any immediate medical attention and special treatment needed
Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment.
Unsuitable extinguishing media No information available.
Specific hazards arising from the chemical
Thermal decomposition can lead to release of irritating and toxic gases and vapors
Keep product and empty container away from heat and sources of ignition
In the event of fire and/or explosion do not breathe fumes
Protective equipment and precautions for firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent)
and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Evacuate personnel to safe areas
Ensure adequate ventilation, especially in confined areas
Remove all sources of ignition
Use personal protection recommended in Section 8
Methods and material for containment and cleaning up
Should not be released into the environment
Pick up and transfer to properly labeled containers
7. HANDLING AND STORAGE