Instructions

2928
Radio-controlled projection alarm clock with thermometer

Radio-controlled projection alarm clock with thermometer

• The hour digits flash.
• Press the ▲ or ▼ button to adjust the hours.
• Confirm the setting with the ALARM button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM button.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the alarm tone automatically turns off after two minutes and will be
reactivated at the same set time on the following day.
• The alarm symbol remains on the display.
• You can activate the snooze function by pressing the SNOOZE/LIGHT button.
• Zz will be flashing and the alarm will be interrupted for 5 minutes.
• You can activate the snooze function up to 7 times.
• To deactivate the alarm function press the ALARM button. The alarm symbol disappears and the date
appears again.
7.4 Temperature display
• Press the °C/°F button in normal mode to select the temperature display in °C (Celsius) or °F (Fahren-
heit) as the temperature unit.
8. Projection and light
• Attention: Continuous illuminated backlight and projection only works when using the power adapter.
• The hour digit will be flashing. Press ▲ or ▼ button to correct the hours (+23/-23) for the DCF time.
• Confirm with the MODE / SET button.
7.1.2 Day-of-week language setting
• The day-of-week language digit will be flashing. Press the ▲ or ▼ button to adjust it.
• Language abbreviations change from one language to another: German (GER), English (ENG), Norwegian
(NOR), Czech (CZE), Russian (RUS), Danish (DAN), Dutch (DUT), Italian (ITA), Spanish (SPA) and
French (FRE).
• Confirm with the MODE / SET button.
7.2 12/24-hour display setting
• Press the WAVE 12/24 button in normal mode to choose 12 HR or 24 HR system.
• In 12 HR system AM or PM appears on the display.
• Confirm with the MODE / SET button.
7.3 Alarm time setting
• Press the ALARM button in normal mode.
• The display shows the alarm symbol and 7:00 (default) or the last adjusted alarm time instead of the
date.
• The alarm is activated.
• Press and hold the ALARM button.
TFA_No. 60.5016_Anleitung 18.04.2019 13:06 Uhr Seite 15