Manualshelf

Instructions

ManualsBrandsTFA Dostmann ManualsCars, Hobbies & HouseholdTFA Dostmann Show 60.5014.01 Radio Alarm clock Digital Black
11121314151617181920
3332
SHOW – Radio-controlled projection clock with indoor climate
SHOW – Radio-controlled projection clock with indoor climate
7.2.1 Day-of-week language setting
• In the setting mode you can choose the day-of-the-week language.
• In the display appears: GERMAN, ENGLISH, FRENCH, SPANISH, DUTCH and ITALIAN.
7.2.2 Time zone setting
• You can make the time zone correction (+12/-12) in setting mode.
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from the DCF
time (e.g. +1=one hour plus).
7.2.3 24- or 12-hour system setting
• In setting mode you can choose between the 12 - or 24 hour system.
• In the 12-HR system AM (before noon) or PM (after noon) appears on the display.
7.2.3 Temperature unit setting
• You can change between °C (Celsius) or °F (Fahrenheit) as temperature unit in setting mode.
7. Operation
7.1 Manual settings
• Important: The device cannot be operated during the DCF time-signal reception.
• Press and hold the + or – button in setting mode for fast mode.
• The device will automatically quit the setting mode if no button is pressed for 20 seconds.
• With the – button you can toggle between weekday (full letters) and date and weekday (abbreviation) in normal mode.
7.2 Setting of the time and date
• Press and hold the SET button in normal mode for three seconds.
• The day-of-week language (GERMAN - default) will be flashing. Press the + or – button to adjust it.
• Press the SET button again to do the settings in the following sequence: the button tone (BEEP ON - default), the time zone (ZONE
00 - default), the 12 or 24 hours system (FORMAT 24 - default), the hours, the minutes, the year, the month, the date, the tempera-
ture unit (TEMP °C - default) and the snooze interval (SNOOZE 10 minutes - default). Press the + or – button to adjust it.
• Confirm the setting with the SET button.
• The manually set time is overwritten once the DCF time signal is successfully received.
TFA_No. 60.5014_Anleitung 17.07.2018 13:28 Uhr Seite 17