Manual

1514
Radio-controlled clock with sunrise and sunset
1. Delivery contents
Radio-controlled clock
Instruction manual
2. Range of application and all the benefits of your new instrument at a glance
Large and easy to read display
With the entire date and weekday written in full letters in English (8 languages)
Highest precision radio-controlled clock
Manual setting option and time zone correction
Sunrise and sunset times
Moon phase
Alarm with snooze function
Ideal for home, office, waiting room, lobby or entrance hall and as a gift
Wall mounting or table stand
3. Safety notices
This product is exclusively intended for the range of application described above.
This product should only be used as described within these instructions.
WARNING
Keep this device and the batteries out of reach of children.
Small parts can be swallowed by children (under three years old).
Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious inter-
nal burns and death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body,
seek medical help immediately.
Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
Low batteries should be changed as soon as possible to prevent damage caused by leaking.
Never use a combination of old and new batteries together, nor batteries of different types.
Make sure the polarities are correct. Remove the batteries if the device will not be used for an extended period of time.
Avoid contact with skin, eyes and mucous membranes when handling leaking batteries. In case of contact, immediately
rinse the affected areas with water and consult a doctor.
CAUTION
Unauthorized repairs, alterations or changes to the product are prohibited.
Radio-controlled clock with sunrise and sunset
Do not expose the device to extreme temperatures, vibrations or shocks.
Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
The device is suitable for indoor use only. Protect it from moisture!
4. Elements
A: LCD display (Fig. 1):
A 1: Time A 2: Alarm symbol
A 3: DCF reception symbol A 4: Daylight Saving Time (DST) symbol
A 5: Snooze symbol A 6: Battery symbol
A 7: Moon phase A 8: Time of sun setting
A 9: Day of the week A 10: Date
A 11: City code A 12: Time of sun rising
B: Buttons (Fig. 2):
B 1: SET button B 2: ALARM button
B 3: UP button B 4: DOWN button
B 5: WAVE button B 6: RESET button
C: Housing (Fig. 2):
C 1: Wall mounting hole C 2: Stand (fold out)
C 3: Battery compartment
5. Getting started
5.1 Insert the batteries
Remove the protective film from the display.
Open the battery compartment and insert four new AA 1.5 V batteries, polarity as illustrated.
The device will alert you with a beep and all LCD segments will be displayed for a short moment. Close the battery cover again.
5.2 Radio-controlled time reception
The clock will now scan the DCF frequency signal and the DCF symbol flashes on the display. When the time code is suc-
cessfully received after some minutes, the radio-controlled time and the DCF symbol will be shown steadily on the display.
In Daylight Saving Time DST is shown on the display.
If there is no reception, you can start the initialisation manually. Press and hold the WAVE button for three seconds.
The DCF symbol flashes.
Interrupt the reception by pressing the WAVE button again for three seconds. The DCF reception symbol disappears.
TFA_No. 60.4524_Anleitung 30.09.2022 13:10 Uhr Seite 8