Instructions

– 38 – – 39 –
BOXX2 – Radio-controlled alarm clock with indoor climate
8.1.1 DCF reception
By default, the DCF reception is activated (DCF ON) and after successful reception of the DCF signal no manual adjust-
ment is necessary.
Once the DCF time reception is deactivated (DCF OFF) the clock and the date must be manually set. No time zone will
appear.
If the DCF reception is activated, the manually set time will be overwritten by the DCF time when the signal is received
successfully.
8.1.2 Time zone setting
In the setting mode you can make the time zone correction
The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from
the DCF time (e.g. +1=one hour plus).
8.1.3 Setting of the snooze interval
You can set the snooze interval (5, 10 or 15 minutes) in the setting mode.
8.1.4 Setting of the optional display
In the setting mode you can choose whether the year, the calendar week or the seconds are displayed next to the date.
BOXX2 – Radio-controlled alarm clock with indoor climate
8.2 Alarm clock function
8.2.1 Alarm time setting
Press the ALARM button in normal mode to enter the alarm setting mode.
6:00 (default) or the last adjusted alarm time 1 appears on the display. The hour digits flash.
Press the or button to set the hours.
Confirm the setting with the ALARM button.
Press the or button to set the minutes.
Confirm the setting with the ALARM button.
7:30 (default) or the last adjusted alarm time 2 appears on the display. The hour digits flash.
Alarm 2 can be adjusted in the same way.
8.2.2 Activate and deactivate the alarm
To activate alarm 1 and / or 2, slide the respective ALARM switch forwards. When the alarm is activated, the alarm time
appears in the upper (ALARM 1) or lower display (ALARM 2).
To deactivate alarm 1 and / or 2, slide the respective ALARM switch backwards. When the alarm is deactivated, OFF
appears in the upper (ALARM 1) or lower display (ALARM 2).
TFA_No. 60.2562.01GB_Anleitung 18.08.2021 16:57 Uhr Seite 20