Instructions

– 32 – – 33 –
BOXX2 – Radio-controlled alarm clock with indoor climate

Caution!
 Risk of electrocution!
• Connect the device via the USB cable only to a suitable USB power source such as a computer, USB charger or USB hub
with charging output (5V DC | min. 500mA).
• The product must not come into contact with water or moisture.
• Do not charge the product if the housing is damaged.
• Charge the device out of reach of persons (including children) who cannot fully appreciate the potential risks of handling
electrical equipment.
• Disconnect the device from the charging power source immediately if any fault occurs.
Caution!
 Risk of injury!
• Explosion and fire hazard! The rechargeable battery must not be thrown into a fire, short-circuited or taken apart.
• The battery cannot and must not be replaced or removed by you. There is a risk of explosion if the battery is replaced
incorrectly. If necessary, a qualified person can obtain instructions on how to dismantle the permanently installed battery
from [e-mail], should this be necessary for the purpose of repairing or recycling the product.
BOXX2 – Radio-controlled alarm clock with indoor climate

 Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks. Avoid direct sunshine.
• The instrument is not unbreakable. In case of falling down parts can break.
5. Elements
A: LCD display (Fig. 1):
A 1: Time zone A 2: Time
A 3: DCF reception symbol A 4: Snooze symbol
A 5: Battery symbol A 6: Alarm 1
A 7: Alarm time 1 or OFF A 8: Alarm 2
A 9: Alarm time 2 or OFF A 10: Indoor temperature
A 11: Year, calendar week or seconds A 12: Date
A 13: Indoor humidity A 14: Indication of day of the week
A 15: Symbol when the alarm is active for alarm time 1 on this day of the week
A 16: Symbol when the alarm is active for alarm time 2 on this day of the week
TFA_No. 60.2562.01GB_Anleitung 18.08.2021 16:57 Uhr Seite 17