Instructions

Radio-controlled alarm clock with temperature
2322
8. Alarm time setting
Press the ALARM SET button in normal mode. ALM and the last
adjusted alarm time will be displayed for a short moment (default:
7:00).
Press and hold the ALARM SET button for three seconds to enter the
setting mode.
The hour digits flash.
Press the UP or DOWN button to adjust the hours.
Confirm the setting with the ALARM SET button and set minutes in
the same way.
Press the ALARM SETbutton again to return to the current time.
To activate the alarm function, move the ALARM ON/OFF switch to
ON.
The alarm symbol appears on the display. The display shows the
adjusted alarm time instead of the date.
When the alarm is activated, the alarm starts to ring when the set
alarm time is reached. The alarm symbol flashes.
Press any button (except SNOOZE/LIGHT) and the alarm will stop.
Press the SNOOZE/LIGHT button to activate the snooze function.
The backlight turns on for a short period. The alarm will be interrupt-
ed for about 5 minutes.
The alarm symbol flashes.
Press any button to stop the snooze function.
To deactivate the alarm function, slide the ALARM ON/OFF switch to
OFF. The alarm symbol disappears.
Radio-controlled alarm clock with temperature
7.1.1 DCF reception
By default, the DCF reception is activated (RCC ON) and after suc-
cessful reception of the DCF signal no manual adjustment is neces-
sary.
Once the DCF time reception is deactivated (RCC OFF), the clock and
date must be manually set. No time zone will appear.
If the DCF reception is activated, the manually set time will be over-
written by the DCF time when the signal is received successfully.
7.1.2 Time zone setting
In the setting mode you can make the time zone correction
The time zone correction is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
7.1.3 Day-of-week language setting
In the setting mode you can set the day-of-the week language: Ger-
man (GER), English (ENG), Dutch (DUT), French (FRE), Italian (ITA),
Spanish (ESP), Danish (DAN) and Russian (RUS). .
7.2 Year display
Press the TIME SET button and the year appears briefly.
TFA_No. 60.2561_Anl_02_21 17.02.2021 17:14 Uhr Seite 12