Instructions

SONIO 2.0 – Radio-controlled alarm clock with thermometer
1716
5. Elements
A: Display (Fig. 1):
A 1: Time
A 2: Symbols: Alarm1, Alarm 2, snooze, night light, summer time,
DCF signal reception, seconds
A 3: Date with weekday, indoor temperature/alarm 1/alarm 2
B: Buttons (Fig. 2):
B 1: LIGHT/SNOOZE button
B 2: button
B 3: + button
B 4: MODE button
B 5: ALARM button
B 6: ALARM button
C: Housing (Fig. 2):
C 1: Light sensor
C 2: Battery compartment
6. Getting started
Remove the protective film from the display.
Open the battery compartment and insert two new AA 1.5 V batteries, polarity
as illustrated.
Close the battery compartment.
The device will alert you with a beep and all LCD segments will be displayed
for a short moment.
The indoor temperature appears on the display.
SONIO 2.0 – Radio-controlled alarm clock with thermometer
4. For your safety
This product is exclusively intended for the range of application described
above. It should only be used as described within these instructions.
Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
Risk of injury!
Keep this instrument and the batteries out of reach of children.
Batteries contain harmful acids and may be hazardous if swallowed. If a bat-
tery is swallowed, this can lead to serious internal burns and death within two
hours. If you suspect a battery could have been swallowed or otherwise
caught in the body, seek medical help immediately.
Batteries must not be thrown into a fire, short-circuited, taken apart or
recharged. Risk of explosion!
Low batteries should be changed as soon as possible to prevent damage
caused by leaking. Never use a combination of old and new batteries together,
nor batteries of different types.
Wear chemical-resistant protective gloves and safety glasses when handling
leaking batteries.
Important information on product safety!
Do not expose the device to extreme temperatures, vibrations or shocks.
Protect it from moisture!
TFA_No. 60.2559_Anleitung 01.07.2020 12:24 Uhr Seite 9