Instructions

2928
Radio-controlled alarm clock

• Press and hold the ALARM SET button. The alarm time
hand flashes.
• Press the + or –button to set the desired alarm time.
• The minutes can only be set to 12, 24, 36, 48 or to the full
hour (see marking).
• Confirm the setting with the ALARM SET button.
• To activate the alarm function press the ALARM ON/OFF
button. The hand for the set alarm time pulsates briefly
and then appears permanently in the display.
• When the adjusted alarm time is reached, the alarm rings.
• Press any button (except SNOOZE/LIGHT) and the alarm
will stop.
• The alarm sound automatically turns off after 3 minutes if
not stopped manually.
• When the alarm rings, press the SNOOZE/LIGHT button and
the snooze function is activated. The alarm time hand pul-
sates.
• The alarm will be interrupted for 5 minutes.
Radio-controlled alarm clock

• The snooze function can be activated up to seven times.
• The alarm will be reactivated twelve hours later.
• Press the ALARM ON/OFF button to deactivate the alarm
function. The alarm time hand disappears.
7. Light
• Press the SNOOZE/LIGHT button.
• The backlight turns on for 5 seconds.
8. Lock function
• Slide the switch to LOCK ON and all buttons are locked.
• Slide the switch to the position LOCK OFF and the func-
tion is deactivated.
9. Care and maintenance
• Clean the device with a soft damp cloth. Do not use sol-
vents or scouring agents.
TFA_No. 60.2555_Anleitung 26.09.2019 10:04 Uhr Seite 15