Instructions

– 26 – – 27 –
2726
BOXX – Radio-controlled alarm clock with thermometer
9. Alarm clock function
9.1 Alarm time setting
Press and hold the ALARM 1 button in normal mode to enter the alarm setting mode.
6:00 (default) or the last adjusted alarm time appear on the display. The hour digits flash.
Press the
or
button to adjust the hours.
Confirm the setting with the ALARM 1 button.
The minute digits flash.
Press the
or
button to set the minutes.
Confirm the setting with the ALARM 1 button.
ALARM 2 can be adjusted in the same way.
9.2 Activate/deactivate alarm
Press the ALARM 1 and/or ALARM 2 button in normal mode.
The last adjusted alarm time appear on the display. The alarm is activated.
Slide the ALARM switch to choose between the three set alarms below:
Monday until Friday (1-5)
Saturday and Sunday (6-7)
Monday until Sunday (1-7)
BOXX – Radio-controlled alarm clock with thermometer
Press ALARM 1 or ALARM 2 button again to deactivate the alarm. -:- - appears on the display.
When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The backlight turns on for a
short period.
Press any button (except SNOOZE/LIGHT) and the alarm will stop.
If the alarm is not stopped manually, the ascending alarm tone automatically turns off after two minutes and it will be
reactivated at the same set time on the following day.
When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated.
The snooze symbol flashes on the display.
The alarm will be interrupted for 5 minutes.
10. Temperature unit setting
Press the °C/°F/
button in the normal mode to change between °C (Celsius) or °F (Fahrenheit) as temperature unit.
11. Backlight
Press the SNOOZE/LIGHT button. The backlight turns on for 3 seconds.
Move the SENSOR ON/OFF switch to ON, a weak backlight turns on automatically as soon as the light sensor registers
darkness.
To deactivate the night backlight slide the switch to the position OFF.
TFA_No. 60.2554_Anleitung 24.05.2019 11:47 Uhr Seite 14