Manual

3130
Radio-controlled alarm clock

• Press any button (except SNOOZE/LIGHT) and the alarm
will stop.
• If the alarm is not stopped manually, the ascending
alarm tone automatically turns off after two minutes
and it will be reactivated at the same set time on the
following day.
• The alarm symbol remains on the display.
• When the alarm rings, press the SNOOZE/LIGHT button
and the snooze function is activated.
• Once the snooze function is activated, the snooze sym-
bol will be flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Press the ALARM ON/OFF button to deactivate the
alarm function.
• The alarm symbol disappears and the date appears on
the display.
Radio-controlled alarm clock

6. Troubleshooting
Problem Solution
No display ➜ Ensure the batteries'
polarity are correct
➜ Change the batteries
No DCF reception ➜ Press and hold the WAVE
button for three seconds to
start the reception manually
➜ Choose another place for
your product
➜ Wait for an attempt recep-
tion during the night
➜ Check if there is any
source of interference
TFA_No. 60.2545_Anleit_01_21 22.01.2021 9:31 Uhr Seite 16