Instructions

2928
BINGO - Radio-controlled alarm clock
7.1.2 Setting of the day-of-week language
Adjust the desired day-of-week language with the or
+
but-
ton: German (D), English (EN), French (FR), Spanish (ES), Italian
(IT) or Dutch (NL).
Confirm the setting with the
SET
button.
7.1.3 Setting of the button tone
Normally the button tone (beep) is disabled (OFF).
Press the or
+
button to activate the button tone (ON).
Confirm the setting with the
SET
button.
8. Alarm
The alarm clock has two alarms with different alarm tones.
8.1 Setting of the first alarm time
Press the
SET 1
button in normal mode.
7:00 (default) or the last adjusted alarm time appears on the
display.
The hour digits will be flashing .
Press or
+
button to adjust the hours.
Confirm the setting with the
SET 1
button.
The minute digit will be flashing. Press the or
+
button to
adjust the minutes.
BINGO - Radio-controlled alarm clock
Confirm the setting with the button
SET 1
.
The adjusted alarm time appears on the display.
To activate the alarm function, move the switch AL 1 ON/OFF
upwards (ON). At the same time, the color mark appears and
on the display appears a frame with the alarm symbol .
The first alarm time is activated.
When the adjusted alarm time is reached, the alarm will ring.
The alarm symbol will be flashing and the backlight will be
activated for 5 seconds.
Press any button and the alarm will stop.
If the alarm is not stopped manually, the increasing alarm will
automatically turn off after certain minutes.
The alarm symbol rests on the display and the alarm time will
be reactivated at the same time.
When the alarm rings, press the
SNOOZE/LIGHT
button and
the snooze function will be activated.
Once the snooze function is activated, zZ will be flashing on
the display.
The alarm will be interrupted for 5 minutes.
Slide the AL 1 ON/OFF switch downwards (OFF) to deactivate
the alarm function.
The alarm symbol and the color mark disappear on the display.
TFA_No. 60.2528_Anleitung 31.03.2014 09:55 Uhr Seite 15