Instructions

Radio controlled alarm clock with thermometer

Radio controlled alarm clock with thermometer

1514
• You can activate the snooze function by pressing the SNOOZE/
LIGHT button on the top.
• Zz is flashing and the alarm will be interrupted for 4 minutes.
5. Backlight
• Press SNOOZE/LIGHT button. The backlight will light for 5 seconds.
• The unit is provided with a light sensor to turn on the light auto-
matically at dark. Use AUTO-LIGHT switch at the rear side to
activate or deactivate the backlight.
6. Battery replacement
• Replace the batteries when the display becomes weak.
• Open the battery compartment and insert the batteries (2 x 1,5 V
AA), polarity as illustrated.
Attention: Please do not dispose of old electronic devices and
empty batteries in household waste. To protect the environment,
take them to your retail store or to appropriate collection sites
according to national or local regulations.
7. Maintenance
• Keep the instrument in a dry place.
• Do not expose the instrument to extreme temperatures, vibration
or shock.
4.2 12 and 24 hours system indication
• Press
▲ / 12/24 button in normal mode to choose 12 HR or 24 HR
system.
• In 12 HR system AM or PM appears on the display.
4.3 °C/°F indication
• Press
▼ / °C/°F button to change between Celsius mode or Fahren-
heit mode as temperature unit.
4.4 Alarm setting
• Press MODE/SET button.
• “AL” appears on the display.
• Hold MODE/SET button.
• The hour digit is flashing. Press
▼ or ▲ button to adjust hours.
• Press MODE/SET button again and set minutes in the same way.
• Holding
▼ or ▲ buttons, you will enter fast mode.
• Confirm with MODE/SET button.
• To activate the alarm function slide the ALARM switch to ON.
• appears on the display.
• Once the alarm starts to ring (3 different sounds), you can stop the
alarm by using the ALARM switch.
TFA_No. 60.2503 Anleitung 29.06.2009 15:15 Uhr Seite 8