Manual

3130
Digital alarm clock with various alarm sounds

8.3 Temperature unit setting
• Press the UP button in normal mode to change between °C (Cel-
sius) or °F (Fahrenheit) as temperature units.
9. Alarm clock function
9.1 Alarm time setting
• Press and hold the ALARM SET button in normal mode for three
seconds to enter the alarm setting mode.
• 6:00 (default) or the last adjusted alarm time 1 appears on the dis-
play.
• The hour digit and the alarm symbol 1 start flashing.
• Press the UP or DOWN button to adjust the hours. Press and hold
the buttons for fast mode.
• Confirm the setting with the ALARM SET button.
• Set the minutes in the same way.
• Confirm the setting with the ALARM SET button.
• “1” flashes on the display and an alarm tone sounds. Alternatively,
15 melodies are available. Press the UP or DOWN button to select
the alarm sound. Confirm the setting with the ALARM SET button.
• 6:00 (default) or the last adjusted alarm time 2 appears on the dis-
play. The hour digit and the alarm symbol 2 start flashing.
• Alarm 2 can be adjusted in the same way.
• Confirm the setting with the ALARM SETbutton.
• The display shows the current time.
• Note:
You can exit the alarm setting mode at any time. Wait 9 seconds,
the device will automatically use the settings you have made so far.
Digital alarm clock with various alarm sounds

9.2 Activate and deactivate the alarm
• To activate or deactivate alarm 1 and / or 2, slide the respective
ALARM ON/OFF switch to ON or OFF.
• When the alarm is activated, the respective alarm symbol will
appear on the display.
9.3 Wake-up process
• When the set alarm time is reached, the alarm clock will wake you
up with the selected setting. The display is activated. The corre-
sponding alarm symbol flashes.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• The alarm sound automatically turns off after 2 minutes if not
stopped manually.
• When the alarm rings, press the SNOOZE/LIGHT sensor button
briefly and the snooze function is activated.
• Once the snooze function is activated, the alarm symbol will be
flashing on the display.
• The alarm will be interrupted for 5 minutes.
• Press any button (except SNOOZE/LIGHT) and the snooze function
will stop.
9.4 Sleep mode
• Press the ALARM SET button in normal mode. An alarm sound
(alarm signal or melodies) sounds for 5 minutes.
• Press the ALARM SET button and the alarm sound will stop. Press
the ALARM SET button again to select the next alarm sound (display
1 to 16).
TFA_No. 60.2032_Anleit_09_22 28.09.2022 15:25 Uhr Seite 16