Manual

2726
Digital alarm clock with various alarm sounds

Caution!
 Risk of electrocution!
• Connect the device via the USB cable only to a suitable USB power
source such as a computer, USB power adapter (DC 5V, min.
500 mA).
• The product must not come into contact with water or moisture.
• Do not charge the product if the housing is damaged.
• Charge the device out of reach of persons (including children) who
cannot fully appreciate the potential risks of handling electrical
equipment.
• Disconnect the device from the charging power source immediate-
ly if any fault occurs.
Caution!
 Risk of injury!
• Batteries containing lithium carry a risk of fire or explosion due
to heat or mechanical damage!
• Protect it from high temperatures. Do not throw into fire, short-
circuit or take apart. If the device becomes hot while charging or
the battery is no longer charged, this is a sign of a defect. Discon-
nect the device from the charging power source immediately.
• The battery cannot and must not be replaced or removed by you.
There is a risk of explosion if the battery is replaced incorrectly. If
necessary, a qualified person can obtain instructions on how to
dismantle the permanently installed battery from info@tfa-dost-
mann.de, should this be necessary for the purpose of repairing or
recycling the product.
Digital alarm clock with various alarm sounds

 Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or
shocks. Avoid direct sunshine.
• The instrument is not unbreakable. In case of falling down parts
can break.
4. Elements
A: LCD display (Fig. 1):
A 1: Time
A 2: Indoor temperature
A 3: Charging symbol
A 4: Alarm symbol 1
A 5: Alarm symbol 2
B: Buttons (Fig. 1-3):
B 1: SNOOZE/LIGHT sensor button
B 2: ALARM 1 ON/OFF switch
B 3: TIME SET button
B 4: UP button
B 5: DOWN button
B 6: ALARM SET button
B 7: ALARM 2 ON/OFF switch
B 8: POWER ON/OFF switch
B 9: RESET button
TFA_No. 60.2032_Anleit_09_22 28.09.2022 15:25 Uhr Seite 14