Instructions

2322
Digital alarm clock with LED digits
8. Display mode
Each press on the TIME button in normal mode will change the display between: Time, indoor
temperature and automatic dimming function OFF/ON.
8.1 Automatic display change
Use the TIME button to select the time or temperature display.
Press the + button for 3 seconds. lOOP appears on the display.
Time and date appear in sequence (temperature 5 s -> time 10 s).
Press and hold the + button for 3 seconds to return to the time display.
8.2 Automatic dimming mode
Select the automatic dimming function OFF/ON by pressing the TIME button.
By default, the automatic dimming function is disabled (OFF).
To activate (ON) or deactivate (OFF) the function press the + or button.
If the auto dimming mode is activated (ON), the weak backlight turns on automatically at 6 pm
and switches off again at 6 am (default setting).
8.2.1 Setting time interval
Press and hold the TIME button (display ON) to enter the setting mode for the automatic timer.
The start time flashes. Press the + or button to set the hours.
Digital alarm clock with LED digits
Confirm the setting with the TIME button and press the + or button to set minutes.
Confirm the setting with the TIME button and set the end time in the same way.
Confirm the setting with the TIME button.
If the auto dimming mode is activated (ON), the weak backlight turns on automatically for the
set time.
9. Display light
USB-/mains connection:
The display illumination works in continuous operation. Press the + button to adjust the bright-
ness in 3 levels or to switch it off.
Battery operation and backlight switched off with USB-/mains connection:
Press any button. The display turns on for 10 seconds.
10. Care and maintenance
Clean the instrument with a soft damp cloth. Do not use solvents or scouring agents.
Unplug the device and remove the batteries if the device will not be used for an extended period
of time.
Store the device in a dry place.
TFA_No. 60.2027_Anleitung 07.06.2020 9:16 Uhr Seite 12