Instructions

1312

Digital alarm clock with room climate

Digital alarm clock with room climate

• Do not use the unit if the housing or the mains adapter are damaged.
• Keep the unit out of reach of persons (including children) who cannot fully appre-
ciate the potential risks of handling electrical equipment.
• Pull the plug out of the socket immediately if any fault occurs or if the unit is not
used for a lengthy period.
• Only use the supplied mains adapter.
• Do not pull the plug out of the socket by its lead.
• Route the mains lead so that it does not come into contact with sharp-edged or hot
objects.
Caution!
 Risk of injury:
•
Keep the batteries out of reach of children.
• Batteries must not be thrown into the fire, short-circuited, taken apart or recharged.
Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible
to prevent damage caused by a leaking battery. Never use a combination of old and
new batteries together, nor batteries of different types. Wear chemical-resistant pro-
tective gloves and glasses when handling leaked batteries.
 Important information on product safety!
•
Do not place the unit near extreme temperatures, vibration or shock.
5. Elements
A: Display (Fig. 1) :
A 1: Humidity (HUMI)
A 2: Comfort Level
A 3: Alarm symbol
A 4: Weekday
A 5: Time/alarm/date
A 6: Temperature (TEMP)
B: Buttons (Fig. 2)
:
B 1: MODE button
B 2: UP button
B 3: DOWN button
B 4: °C/°F button
B 5: MAX/MIN button
B 6: LIGHT/SNZ button
B 7: LIGHT/SNZ button
C: Housing (Fig. 2)
:
C 1: Battery compartment
C 2: Power adapter output
6. Getting started
•
Pull off the protection foil on the display.
• For a permanent lighting and a better reading of the display use the power adapter.
• First connect the lead to the instrument and then insert the mains plug into the socket.
• A brief beep will sound and all LCD segments will light up for about 2 seconds.
• The unit is now ready to use.
• Important! Make sure that your household voltage is 230V! Otherwise your clock
may be damaged.
6.1 Battery operation
•
If no permanent lighting is desired, then you can operate the instrument only with
batteries. Open the battery compartment and insert three new batteries 3 x 1.5 V
AAA. Ensure battery polarity is correct.
• A brief beep will sound and all LCD segments will light up for about 2 seconds.
• The unit is now ready to use.
• The display remains dark.
• Press LIGHT/SNZ button at the base or on the backside to activate the backlight for
10 seconds.
7. Operation
•
The instrument will automatically quit the setting mode if no button is pressed with-
in 10 seconds.
• Press and hold UP or DOWN button in the setting mode for fast running.
7.1 Setting of time
•
Press and hold MODE button in normal mode for three seconds.
• The hour digit is flashing. Press UP or DOWN buttons to adjust the hours.
• Confirm the setting with MODE button.
• The minute digit is flashing. Press UP or DOWN buttons to adjust the minutes.
• Confirm with MODE button.
• Press UP button for 3 seconds in the time mode to choose 12 HR or 24 HR system.
• In 12 HR system PM appears after 12 o’clock on the display.
7.2 Setting of calendar
•
Press MODE button.
• The month-(M) and day display (D) appear in the display.
• Press and hold MODE button for 3 seconds.
• The year digit is flashing. Press UP or DOWN buttons to adjust the year.
TFA_No_60.2011_Anl_ 13.01.2012 10:08 Uhr Seite 7