Instructions

2928
Wireless rain gauge

7.2 Wake-up process
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The backlight turns on for a short period.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and will be reactivated at the
same set time in the following day.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated. Provided that in the alarm setting mode
the snooze function is not deactivated.
• The snooze symbol and the respective alarm symbol are flashing on the display.
• The alarm will be interrupted for the set time.
• Press any button (except SNOOZE/LIGHT) and the snooze function will stop.
8. Temperature
8.1 Trend arrows
• The trend arrows indicate whether the values for temperature are currently increasing or decreasing.
Temperature is increasing
Temperature is decreasing
8.2 Maximum and minimum values
• Press the MEM button in normal mode.
• You can now see the highest (MAX) values since the last reset.
• Press the MEM button again.
• You can now see the lowest (MIN) values since the last reset
• Press the MEM button once more to go back to the current values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the MEM button to clear the recorded reading (display - -).
9. Rain
9.1 Rainfall amount indication
• Press the RAIN/ALERT button in normal mode to change the display between the rainfall amount indications: The last selected dis-
play is permanently active (default NOW).
– NOW - rainfall amount at the start of the rain, automatic reset 30 minutes after rain has finished
– Rainfall amount of the last hour (1HOUR)
Wireless rain gauge

– Rainfall amount of the last 24 hours (24HRS)
– Rainfall amount of the current day (TODAY)
– Rainfall amount of the last 7 days (7 DAYS)
– Rainfall amount of the last month (MONTH)
– Rainfall amount of the last year (YEAR)
– Indication of TOTAL rainfall amount since setting up or the last reset.
• Hold HIST/UP and RAIN/ALERT button for 3 seconds to clear the recorded reading. The HISTORY memory values are retained.
9.2 Cylinder graph rainfall amount
Scale (10 segments = 100 %) 25,4 mm 50,8 mm 127 mm 1270 mm
(1 Inch) (2 Inches) (5 Inches) (50 Inches)
Rainfall amount per segment 2.54 mm 5.08 mm 12.7 mm 127 mm
(0.1 Inch) (0.2 Inch) (0.5 Inch) (5 Inches)
Sample value 2 segments 5 segments 8 segments 10 segments
= 5.08 mm = 25.4 mm = 101.6 mm = 1270 mm
Maximum
rainfall that
can be
displayed
TFA_No. 47.3006_Anleitung 24.09.2021 10:28 Uhr Seite 15