Instructions

18 19
CAUTION
y Unauthorized repairs, alterations or changes to the devices are prohibited.
y Do not expose the devices to extreme temperatures, vibrations or shocks.
y Clean the devices with a soft damp cloth. Do not use solvents or scouring agents.
y The base station is only suitable for indoor use. Protect it from moisture!
Elements
Wireless weather station (base station) (Fig.1)
Display
INDOOR display (Fig.1-A)
Fig.1-A1 Indoor temperature
Fig.1-A2 Indoor humidity
Fig.1-A3 Alert symbol HI/LO
Fig.1-A4 Trend arrows
CLOCK & DATE display (Fig.1-B)
Fig.1-B1 DCF symbol
Fig.1-B2 Time
Fig.1-B3 Date and weekday
Fig.1-B4 Battery symbol base station
OUTDOOR display (Fig.1-C)
Fig.1-C1 Symbol for
alternating channels
Fig.1-C2 Channel number
Fig.1-C3 Outdoor temperature
Fig.1-C4 Outdoor humidity
Fig.1-C5 Alert symbol HI/LO
Fig.1-C6 Battery symbol tempera-
ture-humidity sensor
Fig.1-C7 Reception symbol tem-
perature-humidity sensor
Fig.1-C8 Trend arrows
RAIN display (Fig.1-D)
Fig.1-D1 Reception symbol
rain sensor
Fig.1-D2 Battery symbol
rain sensor
Fig.1-D3 Animated rain symbol
(when it is raining)
Fig.1-D4 Today rainfall graph
Fig.1-D5 Today rainfall amount
Fig.1-D6 Rainfall interval and
alert symbol
Fig.1-D7 Rainfall amount of the
last hour, the last
24 hours, 7 days,
current month, year
and the total amount
of rainfall, history of
the last 12 individual
months
WIND display (Fig.1-E)
Fig.1-E1 Reception symbol
wind sensor
Fig.1-E2 Animated wind wheel symbol
(when it is windy)
Fig.1-E3 Battery symbol wind sensor
Fig.1-E4 Prevailing wind direction of
the last hour
Fig.1-E5 Current wind speed or
maximum wind speed
showing time and date of
recording of the last
24 hours, 7 days, the current
month and year, history of
the last 12 individual months
Fig.1-E6 Average wind speed
(10 minutes) or maximum
wind speed (1 hour)
Fig.1-E7 Alarm symbol
Fig.1-E8 Windchill factor
Fig.1-E9 LCD wind rose with
16 wind directions
Fig.1-E10 Wind interval
FORECAST display (Fig.1-F)
Fig.1-F1 Bar graph indication of
atmospheric pressure for
the last 24 hours
Fig.1-F2 Relative atmospheric
pressure
Fig.1-F3 Weather symbols and
trend indicator
Buttons Housing
Fig.1-G RAIN button
Fig.1-H WIND button
Fig.1-J TEMP button
Fig.1-K + button
Fig.1-L - button
Fig.1-M SET button
Fig.1-N CHANNEL button
Fig.1-O ALERTS button
Fig.1-P Wall mounting holes
Fig.1-R Battery compartment
Fig.1-S Stand (fold out)
Temperature-humidity sensor (Fig.2) Rain sensor (Fig.3)
Display Button & housing Housing
Fig.2-A Channel 1,2,3
Fig.2-B Transmission signal
Fig.2-C Temperature
Fig.2-D Humidity
Fig.2-E Battery symbol
Fig.2-F TX button
Fig.2-G 1 2 3 switch for
channel selection
Fig.2-H Battery compartment
Fig.2-J Support for wall
mounting or table
standing
Fig.3-A Funnel
Fig.3-B Locking tabs
Fig.3-C Base
Fig.3-D Battery compartment
Fig.3-E Rocker
Fig.3-F 4 screw holes
for mounting
Wind sensor (Fig.4)
Housing
Fig.4-A Wind wheel
Fig.4-B Solar panel
Fig.4-C LED signal light
Fig.4-D Wind vane
Fig.4-E Opening for attaching
the adjustable base
Fig.4-F 2 screws for  xing
Fig.4-G Battery compartment
Fig.4-H Adjustable base (180° rotatable)
Fig.4-J Fixing screw
Fig.4-K 4 screw holes for mounting
Getting started
Insert the batteries
y Place the base station and all transmitter on a table at a distance of about 1.5 meters from each other.
Avoid being close to possible sources of interference such as electronic devices and radio equipment.
Temperature-humidity sensor
y Open the battery compartment of the temperature-humidity sensor (Fig.2-H) and insert two new AA 1.5 V
batteries, polarity as illustrated. All LCD segments will be displayed for a short moment.
y The transmitter’s display shows the current temperature and humidity (Fig.2-C+D). The switch is set to
channel 1 (Fig.2-G).
y Close the battery compartment.
Rain sensor
y Open the two tabs (Fig.3-B) on each side of the rain sensor and lift the funnel portion (Fig.3-A)
off the base (Fig.3-C).
y Open the battery compartment (Fig.3-D) and insert two new AA 1,5 V batteries. Make sure the polarities are
correct (see marking on the cover).
y Close the battery compartment.
y Remove the transport lock of the rocker (Fig.3-E).
y Close the housing cover and lock it.
Wind sensor
y Mount the wind sensor (Fig.4-E) on the adjustable base (Fig.4-H). Tighten the two screws (Fig.4-F).
y Open the battery compartment at the bottom of the device (Fig.4-G) and insert three new batteries 1,5 V AA,
polarity as illustrated.
y Close the battery compartment.
y With the solar panel (Fig.4-B) the battery life will be extended.
y The LED signal light (Fig.4-C) is  ashing.
Base station
y Remove the protective  lm from the base station display.
y Insert the three new batteries 1,5 V AA into the battery compartment (Fig.1-R) of the base station.
Make sure the polarities are correct.
y The device will alert you with a beep and all LCD segments will be displayed for a short moment.
y The indoor temperature and humidity appear on the display (Fig.1-A1+A2).