Instructions

2322
METEOTIME PRIMO – Weather Info Center

• Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combina-
tion of old and new batteries together, nor batteries of different types. Wear chemical-resistant protective gloves
and safety glasses when handling leaking batteries.
 Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
• The outdoor transmitter is splash proof, but not watertight. When placed outdoors, choose a dry place for the
transmitter.
5. Elements
5.1 Base station (Receiver) (Fig. 1):
A: First display section
A 1: DCF reception symbol
A 2: Symbols for activated alarms
A 3: Time and date / cities / setting of alarms / critical weather information description
A 4: Symbol Daylight Saving Time (DST)
B: Second display section
B 1: Weekday for today
B 2: Maximum temperature (today) / minimum temperature (tonight)
B 3: Day/Night symbol
B 4: Weather forecast for today
B 5: Reception indicator for Meteotime signal for today
B 6: Wind direction and speed for today
B 7: Probability of rain for today
B 8: Warning symbol for today
C: Third display section
C 1: Day 2, 3 and 4 weekday
C 2: Day 2, 3 and 4 maximum temperature (day) / minimum temperature (night)
METEOTIME PRIMO – Weather Info Center

C 3: Day 2, 3 and 4 warning symbol
C 4: Day 2, 3 and 4 weather forecast
C 5: Day 2, 3 and 4 reception indicator for weather data
D: Fourth display section
D 1: Reception symbol and channel number 1-3 of outdoor transmitter
D 2: Battery symbol for the transmitter
D 3: Outdoor temperature and humidity with trend
D 4: Indoor temperature and humidity with trend
D 5: Battery symbol for the base station
D 6: Indoor symbol
D 7: Symbol for MAX/MIN
E: Housing (Fig. 2):
E 1: Wall mounting hole E 2: Battery compartment
E 3: Stand (fold out)
F: Buttons (Fig. 1):
There are 7 sensor buttons (front) and the SNOOZE/LIGHT button (top) on the base station
F 1: CHANNEL button F 2: + button
F 3: – button F 4: DAY / NIGHT button
F 5: MEM button F 6: TEST button
F 7: SET button F 8: SNOOZE/LIGHT button
5.2 Outdoor transmitter (Fig. 3):
LCD display:
G 1: Outdoor temperature and humidity G 2: Channel number
G 3: Reception symbol G 4: Battery symbol
G 5: LED signal lamp
Buttons (in the battery compartment):
G 6: °C/°F button G 7: CH switch for channel selection
01_TFA_No. 35.1156_Anleitung 29.11.2019 6:59 Uhr Seite 12