Instructions
30
TROUBLESHOOTING
Problems
Solutions
No indication on the
weather station or
transmitter
Ensure batteries polarity are correct
Change batteries
No transmitter reception
Display "---"
Check batteries of external transmitter (do not use rechargeable
batteries!)
Restart the transmitter and weather station as per the manual
Choose another place for the transmitter and/or the weather station
Reduce the distance between the transmitter and the weather station
Check if there is any source of interference
Incorrect display
Change batteries
WASTE DISPOSAL
This product has been manufactured using high-grade materials and components which can be recycled
and reused.
Never throw flat batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to appropriate
collection sites according to national or local regulations in order to protect the environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic
Equipment Directive (WEEE).
Please do not dispose of this product with other household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment, in order to ensure environmentally-compatible disposal.
SPECIFICATIONS
Recommended operating temperature range : +5ºC to +40ºC / +41ºF to +104ºF
Temperature measuring range:
Indoor : -9.9ºC to +59.9ºC with 0.1ºC resolution / 14.2ºF to 139.8ºF with 0.2ºF resolution
(“OF.L” displayed if outside this range)
Outdoor : -39.9ºC to +59.9ºC with 0.1ºC resolution / -39.8ºF to +139.8ºF with 0.2ºF resolution
(“OF.L” displayed if outside this range, “--.-” displayed if no transmitter signal)
Relative humidity measuring range:
Indoor : 20% to 95% with 1% resolution (Display “- -” if temperature is OF.L; display “19%” “
if < 20% and “96%” if > 95%)
Outdoor : 1% to 99% with 1% resolution (Display “- -” if outside temperature is OF.L; display
1% if < 1% and 99% if > 99%)
Data checking interval:
Indoor temperature/humidity checking interval : every 16 seconds
Outdoor temperature/humidity reception : every 4 seconds
Air pressure checking interval : every 1 minute
Transmission frequency : 868 MHz