Instructions

RESETTING THE MAXIMUM/MINIMUM RECORDS

In normal display mode, press and hold the MIN/MAX button for 3 seconds. This will reset ALL minimum

and maximum temperature records to current temperatures.

THE MOON PHASE ICONS

The weather station displays 8 different moon phase icons. The current moon phase is indicated with a bar

segment according to the set calendar.

THERMO-HYGRO TRANSMITTER

The reception distance of the thermo-hygro transmitter may be affected by the temperature. At cold

temperatures the transmitting distance may be decreased. Please bear this in mind when placing the

transmitter. Also the batteries may be reduced in power for the thermo-hygro transmitter.

868 MHz RECEPTION

The weather station should receive the outdoor data within 2 minutes after set-up. If the outdoor data is not

received 2 minutes after setting up (the outdoor temperature and humidity shows “ --.- ”), please check the

following points:

1. The distance of the weather station or transmitter should be at least 1.5 to 2 meters away from any

interfering sources such as computer monitors or TV sets.

2. Avoid positioning the weather station onto or in the immediate proximity of metal window frames.

3. Using other electrical products such as headphones or speakers operating on the same signal

frequency (868MHz) may prevent correct signal transmission and reception.

4. Neighbours using electrical devices operating on the 868MHz signal frequency can also cause

interference.

Note:

When the 868MHz signal is received correctly, do not re-open the battery cover of either the transmitter or

weather station, as the batteries may spring free from the contacts and force a false reset. Should this

happen accidentally then reset all units (see Setting up above) otherwise transmission problems may occur.

The transmission range is about 100 m from the transmitter to the weather station (in open space).

However, this depends on the surrounding environment and interference levels. If no reception is possible

despite the observation of these factors, all system units have to be reset (see Setting up).

A bar segment indicates

the current moon phase

New

Moon

Waning

Crescent

First

Quarter

Waxing

Gibbous