Manual

2726
Wireless weather station

– Site selection of country (default: GER)
– Site selection of city (default: FRA)
– Day-of-week language (default: GE)
– Hour, minutes
– Year, month, date
6.1.1 DCF reception
• By default, the DCF reception is activated (DCF ON) and after success-
ful reception of the DCF signal no manual time setting is necessary.
• In the setting mode, you can deactivate (DCF OFF) or activate again the
DCF reception using the MAX/+ or – /MIN button.
• Once the DCF time reception is deactivated the clock must be manually
set. No time zone will appear.
• If the DCF reception is activated, the manually set time will be overwrit-
ten by the DCF time when the signal is received successfully.
6.1.2 Time zone setting
• In the setting mode you can make the time zone correction +12/-12).
• The time zone correction is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time (e.g.
+1=one hour plus).
6.1.3 Automatic reset of the maximum and minimum values
• In the setting mode, you can activate (AUTO MIN MAX ON) or deacti-
vate again the automatic reset of the maximum and minimum values.
• If the automatic reset is activated, AUTO appears on the display.
• The maximum and minimum values will be reset automatically every
midnight at 0:00 (see “Reset of maximum and minimum values”).
6.1.4 Atmospheric pressure setting
• In the setting mode, the relative atmospheric pressure at the installa-
tion site must be entered. Ask for the current atmospheric pressure of
your home area (Local weather service, Internet, optician, calibrated
instruments in public buildings and airport).
6.1.5 Site selection
• Select the country and city of your location in setting mode.
• A table with the codes for site selection can be found at the end of the
instructions. It can be chosen from 150 European cities.
6.1.6 Day-of-the week language
• You can set the day-of-the week language in setting mode: German
(GE), French (FR), Spanish (ES), Italian (IT), Dutch (NE) and English
(EN).
7. Maximum and minimum values
7.1 Indication of maximum and minimum values
• Press the – /MIN button in normal mode. MIN flashes on the display.
• You can now see the lowest measuring value since the last reset with
time and date of recording.
• The sequence is shown as follows: Outdoor temperature, outdoor
humidity, indoor temperature, indoor humidity, atmospheric pressure.
• If you have installed more than one transmitter, press the CHANNEL
button to change between the outdoor transmitters.
• Press the – /MIN button once more to go back to the current values dis-
play.
• Repeat the process by pressing the MAX/+ button to see the maximum
values. MAX flashes on the display.
Wireless weather station

7.2 Reset of maximum and minimum values
a) Manual reset
• Press and hold the SET button for 3 seconds while the highest or low-
est values are displayed. The values will be deleted and reset to the cur-
rent state.
b) Automatic reset
• Provided that in the setting mode the automatic reset is activated
(AUTO MIN MAX ON). AUTO appears permanently on the display.
• All maximum and minimum values will be reset automatically every
midnight at 0:00.
• An interim manual reset is still possible.
8. Forecast
8.1 Atmospheric pressure
• The relative atmospheric pressure in hPa and the graphic development
of the last 24 hours will appear on the display. If the bars go down, it
means the atmospheric pressure has dropped and the weather is
expected to get worse. If the bars are rising it means that the weather is
getting better.
8.2 Weather forecast symbols (Fig. 4)
• The weather station has 6 different weather symbols: sunny, slightly
cloudy, cloudy, rainy, thunderstorm, snowfall.
• A snow crystal is shown if rain is forecasted and the outdoor tempera-
ture on channel 1 is under 0°C.
• The weather forecast relates to a range of 12 to 24 hours and indicates
only a general weather trend. For example, if the current weather is
cloudy and the rain symbol is displayed, it does not mean the product is
faulty because it is not raining. It simply means that the air pressure
has dropped and the weather is expected to get worse but not neces-
sarily rain. The accuracy is about 70-75 %.
Note!
• Please note that the forecast symbol will become more defined in the
course of operation. The forecast symbol is active right from the start,
however, the reliability of the forecasts increases with the amount of data
collected. To begin with, the sensor must adapt initially to the reference
level at the site.
8.3 Meteo Jack (Fig. 4)
• Weather forecast by “Meteo Jack”: Shorts, scarf, gloves or umbrella?
The “Meteo Jack” shows in 28 variations always the correct clothing for
the current weather and the outdoor temperature.
• Please keep in mind that the clothing state is based on the information
of the transmitter received on channel 1. If this transmitter is not situat-
ed outside or if there is no transmitter connected to channel 1, a wrong
or no display will be the result.
8.4 Trend arrows
• The trend arrows on the display will show whether the atmospheric
pressure of the last 3 hours is increasing, steady or decreasing.
Increase (+1-2 hPa)
Weather improvement
Fast increase (>+2hPa)
Significant weather improvement
Steady (+-1hPa)
Stable weather conditions
Decrease (-1-2 hPa)
Weather deterioration
TFA_No. 35.1097_Anl_04_23 13.04.2023 10:35 Uhr Seite 14