Instructions

LOG10 – Data logger

LOG10 – Data logger

1716
• If the display indicates only “PF“, the battery is completely exhausted. Please
replace the battery immediately.
Attention:
Please do not dispose of old electronic devices and empty batteries in
household waste. To protect the environment, take them to your retail
store or to appropriate collection sites according to national or local regu-
lations.
3.0 Specifications
Temperature logger
Log10
Internal temperature -30..+60°C
Memory appr. 20.000 Data sets
Interface USB
Working temperature (without display) -30..+60°C
Storage temperature -30..+70°C
Dimensions 92 x 55 x 21 mm
Weight 95 g
Power supply 1 x CR2032 3 V
2.5 LED-Indication
• The LED will help you to understand all logger information, several status
modes and alarm indications.
• LED red:
The red LED flashes when Hi- or Lo-Alarm has been achieved.
2.6 USB-Port
• For readout or programming, the data logger must be connected via USB-
cable with a PC.
• View from the front: On the left side there is the USB-port. The port is pro-
tected by a small white rubber cap. To operate the USB-port please remove
the rubber cap.
• After the completed communication with the PC do not forget to plug the
rubber cap back into the port. It prevents dirt and water from entering the
data logger.
2.7 Rear side of the data logger / battery case
•
On the rear side of the data logger you will find the battery case and a printed
sticker.
2.8 Replacing battery
•
To replace the battery please open the battery cover on the rear side. There-
fore you have to turn the battery cover 90° to the left. Remove the battery
from the instrument and replace with a new battery.
• The “BAT “symbol indicates that the battery needs to be exchanged. The
instrument allows app. 24 hours of further operation after displaying the
“BAT“ symbol The battery symbol indicates according to the battery status
between 1 to 3 segments.
DE_Log10_Anleitung 22.03.2011 10:27 Uhr Seite 9