Instructions

1716
AIR CO
2
NTROL UP – CO
2
Monitor

Empfohlener
Arbeitstemperaturbereich +10…30°C
CO
2
-Sensor (Idealbedingungen auch bei der manuellen
Kalibrierung)
Temperatur
Messbereich 0 °C… +50°C (32°F...122°F)
Auflösung 0,1°C
Genauigkeit ±1 °C
Luftfeuchtigkeit
Messbereich 25…95%RH
Auflösung 1% RH
Genauigkeit ±5% RH
Gehäusemaße 77 x 96 x 144 mm
Gewicht 203 g (nur das Gerät)
Diese Anleitung oder Auszüge daraus dürfen nur mit Zustimmung von TFA Dostmann ver-
öffentlicht werden. Die technischen Daten entsprechen dem Stand bei Drucklegung und kön-
nen ohne vorherige Benachrichtigung geändert werden.
Die neuesten technischen Daten und Informationen zu Ihrem Produkt finden Sie auf unserer
Homepage unter Eingabe der Artikel-Nummer in das Suchfeld.
www.tfa-dostmann.de
E-Mail: [e-mail]
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, 97877 Wertheim, Deutschland
Handelsregister-Nummer: Reg. Gericht Mannheim HRA 570186
02/22
AIR CO
2
NTROL UP – CO
2
Monitor

1. Delivery contents
•CO
2
Monitor
• USB-Type-C-1,5 m cable and power adaptor
• Instruction manual
2. Range of application and all the benefits of your new instrument at a
glance
• For monitoring the CO
2
concentration in buildings, where people are
present, eg: schools, offices, public facilities
• High performance NDIR Dual Beam sensor
• Large CO
2
display with extended traffic light indication (green/yellow/
blue/red)
• Display of indoor temperature (°C/°F) and humidity
• Memory of the highest and lowest values of CO
2
, temperature and humi-
dity
• Alarm function for CO
2
concentration
• High contrast display with 4 brightness levels
• Power connection via USB Type-C cable and power supply (included) or
a suitable USB power source
• Integrated rechargeable battery with 12 hours runtime
3. For your safety
• This product is exclusively intended for the range of application described
above. It should only be used as described within these instructions.
• Unauthorized repairs, alterations or changes to the product are prohibited.
Caution!
 Risk of electrocution!
• Connect the device using the USB cable and the supplied power supply to
a mains socket installed within your country’s electrical safety regulations
and with a correct mains voltage (see nameplate) or connect the device
via the USB cable to a suitable USB power source such as a computer,
notebook.
• The mains socket must be located near the equipment and it must be
easily accessible.
• Unplug the device immediately if any fault occurs.
• The device and the power adapter must not come into contact with water
or moisture. Only suitable for indoor use.
• Do not use the device if the housing, the USB cable or the power adaptor
are damaged.
TFA_No. 31.5010_Anleit_02_22 22.02.2022 13:57 Uhr Seite 9