Manual

2322
© Dostmann-Electronic GmbH,
Waldenbergweg 3b,
D-97877 Wertheim-Reicholzheim
Diese Anleitung oder Auszüge daraus dürfen nur mit Zustimmung von Dostmann-Electronic
verö󰀨entlicht werden. Die technischen Daten entsprechen dem Stand bei Drucklegung und
können ohne vorherige Benachrichtigung geändert werden.
Die neuesten technischen Daten und Informationen zu Ihrem Produkt nden Sie unter
Eingabe der Artikel-Nummer auf unserer Homepage.
No part of this manual may be reproduced without written consent of Dostmann-Electronic.
The technical data are correct at the time of going to print and may change without prior
notice. The latest technical data and information about your product can be found by
entering your product number on our homepage.
www.dostmann-electronic.de
Thismessage displaysin variouscases-pleasend belowa
list of the main cases.
Reasons for „LO“ or „HI“ Advice
message display
Temperature reading hampered Make sure that there is no
by hair, perspiration ... obstruction prior to taking a
temperature.
Temperature hampered by an air Make sure there is no air ux
as ux. this could interfere with the infrared system.
The measuring distance is too Please respect the measuring
far. distance (between 5 to 15cm
- 2 to 5.9 in).
From high/low temperature Waiting for 10 minutes before
condition to room temoerature takina the bodv temoerature
15. This appliance conforms to the following standards:
• EN12470-5 and ASTM E1965-1998
• EN 980: Graphical symbols for use in the labeling of medical devices
• EN 1041:Information supplied by the manufacturer with medical diveces
• EN 60601-1: Medical electrical equipment Part 1: General
requirements for safety (IEC:60601-1 :1998)
• EN 60601-1-2: Medical electrical equipment Part 1-2: General
requirements for safety Collateral standard Electromagnetic
compatibility Requirements and test (IEC 60601-1-2:2001)
EMC Statement
This device has been tested and homologated in accordance with
EN60601-1-2:2007 for EMC. This does not guarantee in any way
that the device will not be a󰀨ected by electromagnetic interference.
Avoid using the device in high electromagnetic environment.
The MEDICAL DELECTRICAL EQUIPMENT needs special precau-
tions regarding EMC and needs to be installed and put into service
according to the EMC information provided in the ACCOMPANYING
DOCUMENTS .
GB