Datasheet

remove the batteries and wait for at least 60 seconds

before reinserting them. Once the indoor data is

displayed user may proceed to the next step.

3. After the batteries are inserted, the wireless thermo-

hygrometer will start receiving data signal from the

transmitter. The outdoor temperature and humidity data

should then be displayed on the wireless thermo-

hygrometer. If this does not happen after 2 minutes, the

batteries will need to be removed from both units and

reset from step 1.

4. In order to ensure sufficient 868 MHz transmission

however, the distance between the wireless thermo-

hygrometer and the transmitter should not be more than

100 meters (see notes on “Positioning” and “868 MHz

Reception”).

Note:

In the event of changing batteries of the units, ensure the

batteries do not spring free from the contacts. Always

wait at least 1 minute after removing the batteries before

reinserting, otherwise start up and transmission problems

may occur.

FUNCTION KEYS:

Wireless thermo-hygrometer:

The wireless thermo-hygrometer has 3 easy to use function

keys: 1 key on the front, and 2 keys on the back.

MIN/MAX key: Press to view the MIN/MAX indoor and outdoor

temperature and humidity records.

Press and hold for 3 seconds to reset the all

MIN/MAX temperature and humidity records.

C key

MIN/MAX key

ºF key