Instructions

48
When loss of radio contact occurs, consult the corresponding section of
the instruction manual in order to re-establish contact. If contact cannot
be re-established, or if it should be repeatedly interrupted, check the
general function of your devices when they are placed immediately next
to each other. If the function of the devices is generally possible, but the
transmission at the desired location(s) is not reliable, we recommend
changing the location of the logger and/or the transmitter/receiver in
order to optimize the connection.
PC-Software:
Note that there is a help function within the PC software and that an
instruction manual is included as a PDF-File within the installation folder
of the software.
POSITIONING OF THE LOGGER
The KlimaLogg Pro can be placed on a table or mounted on a wall.
Before mounting it on a wall, ensure that any transmitters in use can be
correctly received at the desired mounting location.
1. Attach an appropriate screw (not included in
the scope of delivery) to the wall and
ensure that its head is approx. 5 mm from
the wall.
2. Fold in the logger’s table stand and hang it
on the screw using the eyelet on its back.
Ensure that the device is securely engaged
with the screw before letting go.
CARE AND MAINTENANCE
• Clean the instrument and the transmitter with a soft damp cloth. Do
not use solvents or scouring agents. Protect from moisture.
• Remove the batteries if you do not use the product for a lengthy
period.
•
Keep the instrument in a dry place.