Instructions

41
The recorded data sets can be called up in history mode or transferred to
a PC using the USB wireless transceiver.
MAX./MIN VALUES AND THE CURRENT DEW POINT in the selected
channel:
• Press OK/MAX/MIN button in normal mode.
• MAX appears in the display and the highest humidity is
displayed.
• Press the button again.
• The highest temperature is displayed.
• Press OK/MAX/MIN button again.
• MIN appears in the display and the lowest humidity is
displayed.
• Press the button again.
• The lowest temperature is displayed
• Press the button again.
• DEW appears in the display.
• The current dew point is displayed.
• The time and date when the respective value was determined
are also displayed.
• The corresponding channel number is shown on the channel
display, and the assigned name or the serial number of an
entered transmitter is displayed.
• To clear the recorded max.min.-values, please press and
hold OK/MAX/MIN button for three seconds in any mode.
• The max./min. values will be deleted for all channels.
• The display shows the current temperature and humidity at
all channels.
Note:
Max./min. values are not recorded in a data set.
Only the current max./min. values are displayed in the PC software.
ALARM SETTING MODE:
• Press and hold the ALM button for the three seconds.
• HIGH AL RH for the selected channel appears in the display.
• The upper alarm limit for the humidity is flashing.
• With the ALM button you can select one possible alarm limit
after the other: