Instructions

MANUAL SETTING

The following manual settings can be done in the setting mode:

• Manual time

• Calendar

• 12/24 hour time display

• Time zone

• Time reception ON/OFF (DCF ON/OFF)

• Temperature unit °C/°F setting

Press and hold the SET key for about 3 seconds to advance to the setting mode:

MANUAL TIME SETTING

In area where reception of the DCF-77 time is not possible, the time can be manually set. The

clock will then be a normal Quartz clock. Once the DCF signal is detected, it will change the

manually set time into the received time. Please proceed the following setting steps at the first

time before using the Temperature Station.