Instructions

Indoor-outdoor thermometer  Indoor-outdoor thermometer 
8 9
 For your safety
• Keep this instrument and its battery out of the
reach of children.
• Batteries must not be thrown into a fire, short-
circuited, taken apart or recharged.
Risk of explosion!
• Batteries contain harmful acids. Low batteries
should be changed as soon as possible to pre-
vent damage caused by a leaking battery.
• Wear chemical-resistant protective gloves and
glasses when handling leaked batteries.
• Do not place your product near extreme tem-
peratures, vibrations or shocks.
1. Getting started
• Pull the protective foil off the display.
• Open the battery compartment by pushing the
cover in direction of the arrow and remove the
insulation strip.
• The display shows the current indoor and out-
door temperature.
• Slide the °C/°F switch at the back of the instru-
ment to change between °C (Celsius) or °F
(Fahrenheit) as temperature unit.
2. Fixing
• Position the thermometer near a window using
the built-in hanging slot with a nail or a screw
or unfold the table stand.
• Lead the cable with the sensing element
through the open window to the outside. The
cable adapts to the window sealing shape. (Take
care of sharp-edged window frames – avoid fre-
quent opening and closing the window).
• Avoid radiators and direct sunshine.
3. Maximum and minimum values
• Press the MAX/MIN button and the highest
and lowest indoor temperatures are displayed
since the last reset.
• Press the MAX/MIN button again, the display
shows the highest and lowest outdoor tempe-
ratures since the last reset.
TFA_No. 30.1009_usw_Anl_03_13 27.03.2013 10:55 Uhr Seite 5