Datasheet

Texcell-NetCom Co., Ltd. All rights reserved.
- 56
-
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm and
≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm
6. CHARACTERISTIC CURVES
Timing Coil Temperature Rise
Ambient Temperature
Life Expectancy Vs. Maximum Voltage