Datasheet

Texcell-NetCom Co., Ltd. All rights reserved.
- 80
-
5. DIMENSIONS (Unit: mm)
Outline Dimensions
Wiring Diagram (Bottom View) PCB Layout (Bottom View)
1 From A
1 From C
Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm and
≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm