Datasheet

- 59

5. DIMENSIONS (Unit: mm)

Outline Dimensions

1) Type 1 (CU11-□□S□□)

PCB Layout (Bottom View) Wiring Diagram (Bottom View) Bottom View

2) Type 2 (CU11-□□S□H)

PCB Layout (Bottom View) Wiring Diagram (Bottom View) Bottom View

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm.