Datasheet

- 124 -

Sealed & Open type TMP Type

PCB Layout (Bottom View)

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm and

≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm

Wiring Diagram (Bottom View)

Sealed & Open type with 6# terminal

1 Form A 1 Form B 1 Form C

Sealed & Open type without 6# terminal

1 Form A 1 Form B 1 Form C