Datasheet

- 68

4. ORDERING

INFORMATION

CS 11 - 12 SH

Relay Model

Contact Arrangement

11: 1 Form A (SPST-NO)

1: 1 Form C (SPDT)

Coil Voltage

3=3VDC, 5=5VDC, 6=6VDC, 9=9VDC, 12=12VDC, 18=18VDC,

24=24VDC, 48=48VDC

Contact Capacity & Coil Power

SH: 5A 250VAC/30VDC, Coil Power 450mW (only for 1 Form A)

3A 250VAC/30VDC, Coil Power 450mW (only for 1 Form C)

SGH: 10A 250VAC / 30VDC, Coil Power 450mW (only for 1 Form A)

H: 3A 250VAC/30VDC, Coil Power 200mW (only for 1 Form A)

Q: 8A 250VAC, Coil Power 200mW (only for 1 Form A)

5. DIMENSIONS (Unit: mm)

Outline Dimensions

1 Form A 1 Form C

Wiring Diagram (Bottom View)

1 Form A 1 Form C

PCB Layout (Bottom view)

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm.

3) The width of the gridding is 2.54mm.