User's Manual

www.ti.com
5.15 Receive Interrupt Mask Set Register (RXINTMASKSET)
EMAC Port Registers
The receive interrupt mask set register (RXINTMASKSET) is shown in Figure 43 and described in
Table 43 .
Figure 43. Receive Interrupt Mask Set Register (RXINTMASKSET)
31 16
Reserved
R-0
15 8 7 6 5 4 3 2 1 0
Reserved RX7 RX6 RX5 RX4 RX3 RX2 RX1 RX0
MASK MASK MASK MASK MASK MASK MASK MASK
R-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0 R/WS-0
LEGEND: R/W = Read/Write; R = Read only; - n = value after reset
Table 43. Receive Interrupt Mask Set Register (RXINTMASKSET) Field Descriptions
Bit Field Value Description
31-8 Reserved 0 Reserved
7 RX7MASK Receive channel 7 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
6 RX6MASK Receive channel 6 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
5 RX5MASK Receive channel 5 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
4 RX4MASK Receive channel 4 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
3 RX3MASK Receive channel 3 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
2 RX2MASK Receive channel 2 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
1 RX1MASK Receive channel 1 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
0 RX0MASK Receive channel 0 mask set bit. Write 1 to enable interrupt, a write of 0 has no effect.
Ethernet Media Access Controller (EMAC)/Management Data Input/Output (MDIO)98 SPRU975B – August 2006
Submit Documentation Feedback