User Manual

Cause Solution
A-Insufficient oil to pump Check oil level in reservoir
B-Air in oil Check oil level in reservoir
C-Excessive pump inlet vacuum Check pump inlet hose for blockage or kinks
D-Blocked hydraulic lines
Flush and clean the splitter hydraulic
system
E-Blocked control valve
Flush and clean the splitter hydraulic
system
F-Low control valve setting Adjust control valve with a pressure gauge
G-High control valve setting Adjust control valve with a pressure gauge
H-Damaged control valve Return control valve for authorized repair
I-Internal control valve leak Return control valve for authorized repair
J-Internal cylinder leak Return cylinder for authorized repair
K-Internally damaged cylinder Return cylinder for authorized repair
L-Engine Control out of adjustment Adjust idle control nuts
M-Engine is loaded during idle down mode
Use shorter log length (24” or less) to allow
engine to speed up before contact.
Specifications
Model Power Split 2000HV
Engine Texas Power Line TG650B
Maximum Pressure 20 ton
Hydraulic Fluid Capacity
2.5 gallons or the level of the oil in the
middle of oil window on oil tank.
Hydraulic Fluid Type
10wt AW32, ASLE H-150, or ISO32